| Wah Kan Stationery & Gifts Company 華根文具公司 | ||
 |
 |
 |
Digital Force Gauges
電子型推拉力計
系列：Z2 / ZP
產地：日本
| 型號: | 荷載 / 最小讀值 |
| Z2-2N : | 2N ( 200 gf ) / 0.001N ( 0.1gf ) |
| Z2-5N : | 5N ( 500 gf ) / 0.001N ( 0.1 gf ) |
| Z2-20N : | 20N ( 2kgf ) / 0.01 N ( 1gf ) |
| Z2-50N : | 50 N ( 5 kgf ) / 0.01 N ( 1 gf ) |
| Z2-100N : | 100 N ( 10 kgf ) / 0.1 N ( 10gf ) |
| Z2-200N : | 200 N ( 20 kgf ) / 0.1 N ( 10gf ) |
| Z2-500N : | 500 N ( 50 kgf ) / 0.1 N ( 10gf ) |
| Z2-1000N : | 1000 N ( 100 kgf ) / 1 N (100 gf ) |
ZP系列 : USB 接口
功能 :
- 可調整瞬間讀取值 ( +peak / -peak ) , 每秒4次至1000 次, 分成 0-6 共七個階段, 針對不同的測試方式選擇不同的瞬間讀取值, 特別針對破裂, 衝擊試驗
- kgf (gf ), N , lb (oz ) 三種計量單位互換
- 精度 : + / - 0.2 % FS
Mechanical Force Gauges
推拉力計機械型
系列： FS / FB 系列普通型
產地：日本
| FB -5lb |
(5lb / 0.05lb ) |
| FB -10lb |
(10lb / 0.1lb ) |
| FB-20lb |
(20 lb / 0.2 lb ) |
| FB -30 lb |
(30 lb / 0.25 lb ) |
| FB - 50 lb | (50lb / 0.5lb ) |
| FB -100 lb |
(100 lb / 1 lb ) |
|
型號: |
荷載 / 最小讀值 |
| FS- 1K | ( 1kgf / 10gf ) |
| FS- 2K | ( 2kgf / 20 gf ) |
| FS -3K | ( 3kgf / 25 gf ) |
| FB - 5K | ( 5 kgf / 50 gf ) |
| FB - 10K | ( 10 kgf / 100 gf ) |
| FB - 20K | ( 20 kgf / 200 gf ) |
| FB - 30K | ( 30 kgf / 250 gf ) |
| FB - 50K | ( 50 kgf / 500 gf ) |
| FB - 10N |
( 10N / 0.1N ) |
| FB - 20N | ( 20N / 0.2N ) |
| FB - 30N |
( 30N / 0.25N ) |
| FB - 50N |
( 50N / 0.5N ) |
| FB -100N | ( 100N / 1N ) |
| FB -200N | ( 200N / 2N ) |
| FB -300N | ( 300N / 2.5 N ) |
| FB-500N |
( 500 N / 5N ) |
- 精度 : + / - 0.3% FS
- 行程 : 10mm
- 刻度 : 一般為100 綫
- ( 3K, 30K , 30N, 300N, 30lb 為120綫 )
Torque Testers
扭力計
產品型號：HTG2
產地：日本
荷載 : 2N-m
顯示 : 2.000N-m
尚有其他型號: HTG2-5N, HTG2-10N, HTG2-200Nc, HTG2-500Nc, HTG2-1000Nc
HTG2 Digital Torque Gauge Ranges (Resolution) Accuracy: ±0.5% F.S. ±1 LSD |
|||
Model |
Capacity (Resolution) |
||
| HTG2-5N | |||
| HTG2-10N | |||
| HTG2-200Nc | |||
| HTG2-500Nc | |||
| HTG2-1000Nc | |||
HTG2 digital torque gauge offers programmable high/low setpoints for go/no-go testing. ORANGE lights up for measurements less than Low setpoint, GREEN for between High and Low setpoint, and RED for over High setpoint.
Store up to 1,000 values in memory, which can be displayed or transmitted using serial output. Use the real time mode to display torque transients, or the peak mode to capture the peak torque achieved during a test. Selectable measuring units of lbf-in, kgf-cm, or N-cm.
HTG2 digital torque gauges are sold in kits which include the gauge, sensor, six foot cable, and AC adapter/charger. Built-in Ni-MH rechargeable batteries.Cap Torque Testers
罐蓋扭力測試儀
產品名稱：罐蓋扭力測試儀
產品型號： DTX2-2N-A(B)
DTX2-5N-A(B),
DTX2-10N-A(B),
DTX2-200Nc-A(B),
DTX2-500Nc-A(B), DTX2-1000Nc-A(B)
產地：日本
DTX2 Cap Torque Tester Ranges (Resolution) Accuracy: ±0.5% F.S. ±1 LSD |
|||
Model |
Capacity (Resolution) |
||
| Capacity | Display | Resloution | |
|
DTX-2-2N-A or B |
2N-m | 2.000N-m | 0.001N-m |
|
DTX-2-5N-A or B |
5N-m | 5.000N-m | 0.001N-m |
|
DTX-2-10N-A or B |
10N-m | 10.00N-m | 0.01N-m |
| DTX-2-200N-A or B | 200N-m | 200.0N-m | 0.1N-m |
| DTX-2-500N-A or B | 500N-m | 500.0N-m | 0.1N-m |
| DTX-2-1000N-A or B | 1000N-m | 1000N-m | 1N-m |
|
Difference between models followed by “-A” and models
followed by “-B” DTX2-[range]-A : Mains AC100V~240V DTX2-[range]-B : NiMH rechargeable batteries or AC adapter |
|||
Cap Torque Tester
Series DTX2
- Programmable high/low setpoints with color-coded LED indicators and output signal for quick go/no go testing
- 1,000 Data memory for computer download
- lbf-in, kgf-cm, and N-cm units are selectable
- RS-232C, Digimatic and Analog outputs
- Runs on internal Ni-MH batteries or AC adapter
- Both clockwise and counterclockwise operation
- Overload capacity 200% of F.S.
- Real time and peak mode (selectable)
- Overload indicator and output signal
- Low battery indicator
- Clamps containers from 1/2"~ 7" in diameter
Imada’s cap torque tester offers programmable high/low setpoints for go/no-go testing. ORANGE lights up for measurements less than Low setpoint, GREEN for between High and Low setpoint, and RED for over High setpoint.
Store up to 1,000 values in memory, which can be transmitted using the serial output. Use the real time mode to display torque transients, or the peak mode to capture the peak torque achieved during a test. Selectable measuring units of lbf-in, kgf-cm, or N-cm.
DTX2 cap torque testers include AC adapter/charger and built-in Ni-MH rechargeable batteries, 1" high standard pegs (optional long pegs and calibration kit available).